|
|
Flow rate: Nominal 80 Litres/min (17.8 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)
Pressure up to 2.5 bar
Features:
• Easy to service and maintain.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Non pulsating flow
• Handles viscosities up to 4,000 centiPoise
• Minimal shear to thixotropic fluids
•
• Fits IEC standard motor B3/B14, frame 80
| Specifications: |
|
|
| Body | | 316 Stainless steel
|
|
| Pump/Motor Adapter | | Epoxy coated cast iron
|
|
| Impeller | | Neoprene, Nitrile, EPDM & Viton
|
|
| Seal | | Carbon / Ceramic mechanical face seal,
Optional: Tungsten Carbide / Ceramic hard faced mechanical seal;
Nitrile Lip seal on shaft sleeve;
Carbon / Ceramic flushed seal;
Tungsten Carbide / Ceramic hard faced flushed seal;
|
|
| Seal Elastomer | | Nitrile or Viton
|
|
| Bearings | | Uses motor bearings
|
|
| Shaft | | 316 Stainless steel, shaft extension
|
|
| Port Type | | 1" BSP internal thread to BS21 (DIN2999)
|
|
| Weight | | 7.25 lb 3.3 kg
|
|
