|
|
Flow rate: 11 USgpm, maximum head 50ft (21.6psi)
Self-priming from dry up to 2.4m (7.8ft)
Features:
• Easy to service and maintain.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Non pulsating flow
| Specifications: |
|
|
| Body | | Epoxy Plastic
|
|
| Impeller | | Neoprene, Nitrile or Viton
|
|
| Seal | | Carbon/ceramic mechanical type
|
|
| Bearings | | Uses motor bearings
|
|
| Shaft | | Corrosion Resistant Steel with Epoxy
Drive Sleeve in Contact with Fluid
|
|
| Port Type | | 1/2" NPT Internal
|
|
| Voltage | | 115 VAC
|
|
| Cycles | | 60 Hz
|
|
| Motor | | 1/2hp 1725rpm
|
|
| Weight | | 33.5 lb 15.3 kg
|
|
