|
|
Flow rate: Nominal 40 Litres/min (8.9 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)
Pressure up to 3.5 bar
Features:
• Easy to service and maintain.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids (max 5mm diameter) without clogging.
• Non pulsating flow
• Handles viscosities up to 10,000 centiPoise
• High chemical resistance Epoxy plastic
• No metal parts in liquid contact
| Specifications: |
|
|
| Body | | Epoxy Thermoset plastic
|
|
| Bearing Housing | | Epoxy coated cast iron
|
|
| Impeller | | Neoprene, Nitrile or Viton
|
|
| Seal | | Carbon/ceramic mechanical type
|
|
| Seal Elastomer | | Nitrile or Viton
|
|
| Bearings | | Twin single row, ball type
|
|
| Shaft | | Epoxy covered stainless steel shaft
|
|
| Port Type | | 3/4" BSP external thread to BS21 (DIN2999)
|
|
| Weight | | lb kg
|
|
