 Jabsco / Industrial / General Purpose Pumps / Stainless Steel & Epoxy Pumps |
| Stainless Steel & Epoxy Pumps |
|
30510 Epoxy Motor Pump Unit
40 Size Epoxy Motor Pump Unit |
|
Model No.:30510-5xxx
Flow rate: Nominal 8.2 USgallons/min at 1750rpm
Self-priming from dry up to 2.4m (7.8ft)
Pressure up to 1.5 bar
Features:
• Easy to service and maintain.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Non pulsating flow
| Specifications: |
|
|
| Body | | Epoxy Plastic
|
|
| Pump/Motor Adapter | | Epoxy coated cast iron
|
|
| Impeller | | Neoprene, Nitrile, Viton or EPDM
|
|
| Seal | | Carbon/Ceramic mechanical type,
Optional: Tungsten Carbide/Ceramic hard faced mechanical seal
|
|
| Bearings | | uses motor bearings
|
|
| Shaft | | Epoxy Plastic Covered Stainless Steel
|
|
| Port Type | | 3/4" NPT External
|
|
| Voltage | | 115 VAC
|
|
| Cycles | | 60 Hz
|
|
| Motor | | 3/4 HP 1750 RPM, TEFC, 56C Frame,
C-Face, Overload Protected,
Capacitor Start.
|
|
| Weight | | 35.0 lb 15.9 kg
|
|
|
Models:
|
|
|
30510-5001
| Specifications:: |
|
|
| Impeller | | Neoprene
|
|
| Seal Elastomer | | Nitrile
|
|
| Seal | | Carbon/Ceramic mechanical type
|
|
|
|
|
30510-5003
| Specifications:: |
|
|
| Impeller | | Nitrile
|
|
| Seal Elastomer | | Nitrile
|
|
| Seal | | Carbon/Ceramic mechanical type
|
|
|
|
|
30510-5004
| Specifications:: |
|
|
| Impeller | | Viton
|
|
| Seal Elastomer | | Viton
|
|
| Seal | | Carbon/Ceramic mechanical type
|
|
|
|
|
30510-5101
| Specifications:: |
|
|
| Impeller | | Neoprene
|
|
| Seal Elastomer | | Nitrile
|
|
| Seal | | Tungsten Carbide/Ceramic hard faced mechanical seal
|
|
|
|
|
30510-5103
| Specifications:: |
|
|
| Impeller | | Nitrile
|
|
| Seal Elastomer | | Nitrile
|
|
| Seal | | Tungsten Carbide/Ceramic hard faced mechanical seal
|
|
|
|
|
30510-5104
| Specifications:: |
|
|
| Impeller | | Viton
|
|
| Seal Elastomer | | Viton
|
|
| Seal | | Tungsten Carbide/Ceramic hard faced mechanical seal
|
|
|
| INDUSTRIAL: Circulating and transferring corrosiveliquids. Returning spilled liquids to process. Transferringfoaming solutions with entrained air, such as soaps anddetergents. Sampling and pilot plant installations.Handles pure solutions, acids, alkalies, photochemicals,dyes, detergents, waxes, gels, solutions with suspendedsolids and emulsions.;METAL PLATING: Filtration of plating solutions. Fillingand emptying vats. Adding chemicals for pH balance.;PHARMACEUTICAL: Processing lab solutions,medicines, lotions and preparations. Filteringpharmaceutical solutions.;AGRICULTURAL: Transferring liquid fertilizers,herbicides and pesticides.; |
|
|
|
