|
|
Flow rate: Nominal 370 Litres/min (82.2 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)
Pressure up to 2.5 bar
Features:
• Easy to service and maintain.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Non pulsating flow.
• Handles viscosities up to 4,000 centiPoise.
• Minimal shear to thixotropic fluids.
• Fits IEC standard motor B3/B14, frame 100.
| Specifications: |
|
|
| Body | | 316 Stainless steel
|
|
| Pump/Motor Adapter | | Epoxy coated cast iron
|
|
| Impeller | | Neoprene or EPDM
|
|
| Seal | | Carbon/Ceramic mechanical type,
Optional: Tungsten Carbide/Ceramic hard faced mechanical seal
or Tungsten Carbide / Ceramic hard faced flushed seal
|
|
| Seal Elastomer | | Nitrile or Viton
|
|
| Bearings | | Uses motor bearings
|
|
| Shaft | | 316 Stainless steel, shaft extension
|
|
| Port Type | | 2" BSP external thread to BS21 (DIN2999)
|
|
| Weight | | 21.34 lb 9.7 kg
|
|
