|
|
Flow rate: Nominal 270 Litres/min (60 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)
Features:
• Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
• Easy to service and maintain.
• Inexpensive to buy and operate.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Can pump in either direction.
• Will not airlock.
• Non Centering one-piece handle helps prevent partial engagement
• Self adjusting clutch
• 'Double-life' feature to increase clutch life
| Specifications: |
|
|
| Body | | Bronze head, Cast Iron bearing housing
|
|
| Impeller | | Neoprene or Nitrile
|
|
| Wearplate | | Replaceable
|
|
| Shaft | | Stainless steel
|
|
| Shaft Seal | | Carbon/ceramic mechanical type
|
|
| Bearings | | Twin single row, ball type
|
|
| Port Type | | 2" Flange or BSP to BS21 (DIN2999)
|
|
| Clutch Type | | Manual - Self Adjusting
|
|
| Pulley | | 180mm (7") 'A' or 'B' section
|
|
| Weight | | 24.2 lb 11 kg
|
|
